{"title":"Chevrolet Corvette","description":null,"products":[{"product_id":"silver-s-neomax-coilovers-chevrolet-corvette-c5-c6-1997-2013","title":"Silver’s NEOMAX Coilovers Chevrolet Corvette C5 \/ C6 1997-2013","description":"\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/silvers-na.com\/products\/silver-s-neomax-coilover-kit-rear-dampening-adjustment-extenders-pair?variant=29559612375115\"\u003eRear Extenders\u003c\/a\u003e are recommended on this application.\u003c\/li\u003e\n\u003cli\u003eStandard height kit lowered all the way will sit flush tire to fender on C6's, half inch wheel gap on C5's. \u003ca href=\"https:\/\/silvers-na.com\/products\/silvers-super-low-kit?variant=29559612276811\"\u003eSuper Low\u003c\/a\u003e will drop a further .75 inch. \u003c\/li\u003e\n\u003cli\u003eCommon Spring Rate Selections:\u003c\/li\u003e\n\u003cli\u003e12k\/8k, soft comfortable daily driver, not much aggressive driving.\u003c\/li\u003e\n\u003cli\u003e12k\/10k Good all-around setup, sporty but not too stiff. Our preferred setup. \u003c\/li\u003e\n\u003cli\u003e14k\/10k Drift setup when running a front sway bar, or Iron Block swapped.\u003c\/li\u003e\n\u003cli\u003e18k\/10k Drift setup when NOT running a front sway bar.\u003c\/li\u003e\n\u003cli\u003eAdjustable T6 6061 front camber plates on all applicable McPherson style applications.\u003c\/li\u003e\n\u003cli\u003eKoyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.\u003c\/li\u003e\n\u003cli\u003e24 levels of damping adjustability combined with our high-grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the driver’s seat.\u003c\/li\u003e\n\u003cli\u003eHigh strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.\u003c\/li\u003e\n\u003cli\u003e44mm piston with digressive style valving characteristics provides maximum low-speed damping response for ultimate performance while simultaneously giving a comfortable ride.\u003c\/li\u003e\n\u003cli\u003eMono-tube shock design, Increases shock oil capacity as well as displacement over twin-tube designs for maximum performance.\u003c\/li\u003e\n\u003cli\u003eHigh viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock absorption and damping control.\u003c\/li\u003e\n\u003cli\u003eHeight adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.\u003c\/li\u003e\n\u003cli\u003eCold-bent springs made from high-strength SAE9254 steel which keeps stable elastic modulus.\u003c\/li\u003e\n\u003cli\u003ePowder-coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.\u003c\/li\u003e\n\u003cli\u003eAnodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.\u003c\/li\u003e\n\u003cli\u003e5 Year-limited manufacturer’s warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDefault Spring Rates: Front 12K Rear 10K\u003c\/p\u003e\n\u003cp\u003e*photos may be generic and do not reflect actual product\u003c\/p\u003e","brand":"Silver's Suspension","offers":[{"title":"12K \/ 8K Soft\/Comfort \/ Standard Steel Shock Body","offer_id":45968864018605,"sku":"SC2006","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Silvers-NEOMAX-Coilovers-Chevrolet-Corvette-C5-C6-1997-2013.jpg?v=1777758038"},{"product_id":"silver-s-neomax-coilovers-chevrolet-corvette-c7-2014-2019","title":"Silver’s NEOMAX Coilovers Chevrolet Corvette C7 2014-2019","description":"\u003cul\u003e\n\u003cli\u003eAdjustable T6 6061 front camber plates on all applicable McPherson style applications.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKoyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.\u003c\/li\u003e\n\u003cli\u003e24 levels of damping adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the driver’s seat.\u003c\/li\u003e\n\u003cli\u003eHigh strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.\u003c\/li\u003e\n\u003cli\u003e44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.\u003c\/li\u003e\n\u003cli\u003eMono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.\u003c\/li\u003e\n\u003cli\u003eHigh viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and damping control.\u003c\/li\u003e\n\u003cli\u003eHeight adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.\u003c\/li\u003e\n\u003cli\u003eCold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.\u003c\/li\u003e\n\u003cli\u003ePowder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.\u003c\/li\u003e\n\u003cli\u003eAnodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.\u003c\/li\u003e\n\u003cli\u003e5 Year limited manufacturer’s warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDefault Spring Rates: Front 10K Rear 10K\u003c\/p\u003e\n\u003cp\u003e*Kits do not come standard with blue Swift springs. These are available as an add-on on request.\u003c\/p\u003e\n\u003cp\u003e*photos may be generic and do not reflect actual product\u003c\/p\u003e","brand":"Silver's Suspension","offers":[{"title":"Standard Steel Shock Body","offer_id":45968874602669,"sku":"SC2010","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Photoroom_20251211_133038.jpg?v=1777758778"},{"product_id":"silver-s-neomax-2-way-coilovers-chevrolet-corvette-c5-c6-1997-2013","title":"Silver’s NEOMAX 2-Way Coilovers Chevrolet Corvette C5 \/ C6 1997-2013","description":"\u003cul\u003e\n\u003cli\u003eRear Extenders recommended on this application.\u003c\/li\u003e\n\u003cli\u003eCommon Spring Rate Selections:\u003c\/li\u003e\n\u003cli\u003e12k\/8k, soft comfortable daily driver, not much aggressive driving.\u003c\/li\u003e\n\u003cli\u003e12k\/10k Good all around setup, sporty but not too stiff.\u003c\/li\u003e\n\u003cli\u003e14k\/10k Drift setup when running a front sway bar.\u003c\/li\u003e\n\u003cli\u003e18k\/10k Drift setup when NOT running a front sway bar.\u003c\/li\u003e\n\u003cli\u003eAdjustable T6 6061 front camber plates on all applicable McPherson style applications.\u003c\/li\u003e\n\u003cli\u003eKoyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.\u003c\/li\u003e\n\u003cli\u003e24 levels of damping adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the driver’s seat.\u003c\/li\u003e\n\u003cli\u003eHigh strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.\u003c\/li\u003e\n\u003cli\u003e44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.\u003c\/li\u003e\n\u003cli\u003eMono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.\u003c\/li\u003e\n\u003cli\u003eHigh viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and damping control.\u003c\/li\u003e\n\u003cli\u003eHeight adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.\u003c\/li\u003e\n\u003cli\u003eCold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.\u003c\/li\u003e\n\u003cli\u003ePowder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.\u003c\/li\u003e\n\u003cli\u003eAnodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.\u003c\/li\u003e\n\u003cli\u003e5 Year limited manufacturer’s warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\nDefault Spring Rates: Front 12K Rear 10K\n\u003cp\u003e*photos may be generic and do not reflect actual product\u003c\/p\u003e","brand":"Silver's Suspension","offers":[{"title":"Standard Steel Shock Body","offer_id":45968904781997,"sku":"SC2006-2W","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Silvers-NEOMAX-2-Way-Coilovers-Chevrolet-Corvette-C5-C6-1997-2013.jpg?v=1777759442"},{"product_id":"silver-s-neomax-2-way-coilovers-chevrolet-corvette-c7-2014-2019","title":"Silver’s NEOMAX 2-Way Coilovers Chevrolet Corvette C7 2014-2019","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommon Spring Rate Selections:\u003c\/li\u003e\n\u003cli\u003e8k\/10k, soft comfortable daily driver, not much aggressive driving.\u003c\/li\u003e\n\u003cli\u003e10k\/10k Good all around setup, sporty but not too stiff.\u003c\/li\u003e\n\u003cli\u003e12k\/12k Great weekend track toy that can still be street driven.\u003c\/li\u003e\n\u003cli\u003e14k\/10k Drift setup when running a front sway bar.\u003c\/li\u003e\n\u003cli\u003e18k\/10k Drift setup when NOT running a front sway bar.\u003c\/li\u003e\n\u003cli\u003eAdjustable T6 6061 front camber plates on all applicable McPherson style applications.\u003c\/li\u003e\n\u003cli\u003eKoyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.\u003c\/li\u003e\n\u003cli\u003e24 levels of damping adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the driver’s seat.\u003c\/li\u003e\n\u003cli\u003eHigh strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.\u003c\/li\u003e\n\u003cli\u003e44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.\u003c\/li\u003e\n\u003cli\u003eMono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.\u003c\/li\u003e\n\u003cli\u003eHigh viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and damping control.\u003c\/li\u003e\n\u003cli\u003eHeight adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.\u003c\/li\u003e\n\u003cli\u003eCold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.\u003c\/li\u003e\n\u003cli\u003ePowder coated steel lower brackets matching all factory brake line \u0026amp; ABS wire tabs, for seamless installation.\u003c\/li\u003e\n\u003cli\u003eAnodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.\u003c\/li\u003e\n\u003cli\u003e5 Year limited manufacturer’s warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDefault Spring Rates: Front 10K Rear 10K\u003c\/p\u003e\n\u003cp\u003e*photos may be generic and do not reflect actual product\u003c\/p\u003e","brand":"Silver's Suspension","offers":[{"title":"Standard Steel Shock Body","offer_id":45968906059949,"sku":"SC2010-2W","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Silvers-NEOMAX-2-Way-Coilovers-Chevrolet-Corvette-C7-2014-2019.jpg?v=1777759460"},{"product_id":"eibach-pro-kit-lowering-springs-for-2020-2023-chevrolet-corvette-6-2l-v8-convertible-rwd-c8","title":"Eibach Pro-Kit Lowering Springs for 2020-2023 Chevrolet Corvette 6.2L V8 Convertible RWD (C8)","description":"\u003cp\u003eEibach Pro-Kit Lowering Springs are the perfect answer for improving the performance and handling of the 2020-2023 Chevrolet Corvette 6.2L V8 Convertible RWD (C8). It's Eibach's legendary spring system that dramatically improves both a vehicle's street performance and appearance. The Eibach PRO-KIT is a premium line of lowering springs designed to enhance the performance and appearance of your vehicle. Whether you're a car enthusiast looking to improve the handling of your daily driver or motorsports competitor looking for an edge on the track, Eibach PRO-KIT springs have you covered.\u003c\/p\u003e\u003cp\u003eEibach Pro-Kit springs lower your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.\u003c\/p\u003e\u003cp\u003eEvery Eibach Pro-Kit is designed and tested by Eibach suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.\u003c\/p\u003e\u003cp\u003eThe Eibach PRO-KIT Lowering Springs put you ahead of the competition by providing exceptional performance and improved handling. Its progressive spring design and advanced materials provide a lower center of gravity and increased tire-to-road contact, giving you the edge when it comes to stability and control on the track or on the road.\u003c\/p\u003e\u003cp\u003eThe PRO-KIT's aggressive stance also gives your vehicle a sporty look that sets it apart from the rest. With the Eibach PRO-KIT installed on your vehicle, you can trust that you have the advantage over your competitors, both in terms of performance and appearance.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eImproved handling and stability, especially when cornering\u003c\/li\u003e\n\u003cli\u003eA lower center of gravity which results in better vehicle control\u003c\/li\u003e\n\u003cli\u003eA more aggressive stance which gives your vehicle a sportier look\u003c\/li\u003e\n\u003cli\u003eIncreased tire-to-road contact for better traction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProgressive spring design for excellent ride quality\u003c\/li\u003e\n\u003cli\u003eMillion-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/eibach.com\/storage\/instructions\/D3950.pdf\" target=\"_blank\"\u003eInstallation Instructions (PDF) - D3950.pdf \u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2020 Chevrolet Corvette 6.2L V8 Convertible RWD (C8)\u003c\/li\u003e\n\u003cli\u003e2021 Chevrolet Corvette 6.2L V8 Convertible RWD (C8)\u003c\/li\u003e\n\u003cli\u003e2022 Chevrolet Corvette 6.2L V8 Convertible RWD (C8)\u003c\/li\u003e\n\u003cli\u003e2023 Chevrolet Corvette 6.2L V8 Convertible RWD (C8)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":45970619236525,"sku":"E10-23-036-01-22","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/eibach-pro-kit-lowering-springs-for-2020-2023-chevrolet-corvette-6-2l-v8-convertible-rwd-c8-e10-23-036-01-22-1194410706.jpg?v=1777853272"},{"product_id":"kw-19261415","title":"KW HLS 4 For KW Coilovers – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eWith the KW HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speed bumps, railroad crossings, road construction, garage approaches and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or at both axles by up to 45 mm. This prevents accidental damage to your aero components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or as a retrofit for your factory dampers depending on the type of car and the model. For a wide range of super cars and performance vehicles KW HLS is available as an application-specific solution. Included in the delivery is all the necessary parts for installation including the hydraulic lines \u0026amp; hydraulic pump adapted to your vehicle. All of the components will fit perfectly in your car. If you want to combine the HLS with your factory suspension or upgrade to our KW coilovers, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many well-known international automotive companies place their trust in KW HLS systems and coilover kits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW HLS adds hydraulic lift to your KW Coilover kit. Designed for vehicles with a low ground clearance to help more easily navigate obstacles like speed bumps and steep driveway entrances.\u003c\/li\u003e\n\u003cli\u003eIncludes a complete system comprised of 4 HLS rams, self-contained vehicle specific pump units, electronic control module and in-cabin multi-function control button.\u003c\/li\u003e\n\u003cli\u003eKW HLS systems does not alter or negatively affect the driving dynamics of your coilover system thanks to the static hydraulic rams which remains completely rigid in the elevated or lowered position.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW HLS systems lift your vehicle at the push of a button, allowing you to negotiate obstacles like speed bumps and steep parking garage entrances. Depending on the kit, your vehicle can be lifted at the front or both axles by up to 45 mm.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997454983341,"sku":"19261415","price":9025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/KW_HLS_001_01da7b12-729a-4fc5-9acf-42303cc66ec8.jpg?v=1780113343"},{"product_id":"kw-25361034","title":"KW Height Adjustable Spring Kit – 2020–2026 Chevrolet Corvette","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997460422829,"sku":"25361034","price":2000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/KW_25361034_001_2000_577f5434-7e74-4c9e-9185-027bbec27019.jpg?v=1780197105"},{"product_id":"kw-35261001","title":"KW Damper Kit V3 – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997527826605,"sku":"35261001","price":3415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261001_001_9d201887-f6cc-4dab-a264-f9521df95e9b.jpg?v=1780135176"},{"product_id":"kw-35261010","title":"KW Damper Kit V3 – 2006–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997527924909,"sku":"35261010","price":3415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_c224e221-5a36-42a5-b131-d7daa3ab04cc.jpg?v=1780135449"},{"product_id":"kw-35261011","title":"KW V3 Coilover Kit – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patente d system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997527957677,"sku":"35261011","price":5365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261011_001_4f0529b0-8f11-4fe5-bfd1-3e1c780d99bf.jpg?v=1780135620"},{"product_id":"kw-35261015","title":"KW V3 Coilover Kit – 2006–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528055981,"sku":"35261015","price":5475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_b6c97cc9-7090-49f8-a077-580a74ffd2c8.jpg?v=1780135450"},{"product_id":"kw-35261020","title":"KW Damper Kit V3 Bundle – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday  life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528154285,"sku":"35261020","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261020_001_eeeb42b9-5e2a-4cc3-800b-c840dc948e61.jpg?v=1780135626"},{"product_id":"kw-35261021","title":"KW V3 Coilover Kit Bundle – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features pat ented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528187053,"sku":"35261021","price":5850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_83035227-18bd-4397-ab39-8de8d9333c32.jpg?v=1780135450"},{"product_id":"kw-35261022","title":"KW Damper Kit V3 Bundle – 2006–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528219821,"sku":"35261022","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261022_001_1797fdcc-b906-4e96-98f9-116d051b4b84.jpg?v=1780135620"},{"product_id":"kw-35261023","title":"KW V3 Coilover Kit Bundle – 2006–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528285357,"sku":"35261023","price":5950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_4b20aace-9680-47b0-855a-3eb31d535e07.jpg?v=1780135450"},{"product_id":"kw-35261024","title":"KW V3 Coilover Kit – 2014–2019 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528350893,"sku":"35261024","price":5670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_fd40fa9f-026f-4141-8058-0f6137fc4e99.jpg?v=1780135450"},{"product_id":"kw-35261025","title":"KW V3 Coilover Kit Bundle – 2014–2019 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997528973485,"sku":"35261025","price":6095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261025_001_d41c7920-03de-4c9d-a276-4f07b2a74fe0.jpg?v=1780135621"},{"product_id":"kw-35261031","title":"KW V3 Coilover Kit – 2020–2026 Chevrolet Corvette [35261031]","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529104557,"sku":"35261031","price":6000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261031_001_c58a2f31-6c64-4d1a-a8ee-9c58ce0f420c.jpg?v=1780135460"},{"product_id":"kw-35261032","title":"KW V3 Coilover Kit Bundle – 2020–2026 Chevrolet Corvette [35261032]","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529137325,"sku":"35261032","price":6375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35261031_001_af88a6a6-41af-4a1c-9e55-a8afd0c32bb4.jpg?v=1780135460"},{"product_id":"kw-35261033","title":"KW V3 Coilover Kit – 2020–2026 Chevrolet Corvette [35261033]","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529170093,"sku":"35261033","price":6280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_39b29cfe-6bdd-4345-ac56-2308b263f83c.jpg?v=1780135451"},{"product_id":"kw-35261034","title":"KW V3 Coilover Kit Bundle – 2020–2026 Chevrolet Corvette [35261034]","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529202861,"sku":"35261034","price":6695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_f9ccaf67-f9ea-4dc0-93bf-d84cf14df6e9.jpg?v=1780135452"},{"product_id":"kw-35261415","title":"KW V3 Coilover Kit + HLS 4 – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany. Each damper is dyno tested to ensure accuracy before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eIncludes KW HLS4 hydraulic lift system for both axles which increases ground clearance at the push of a button. The vehicle specific HLS system includes a self-contained pump and does not affect ride quality or handling.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529235629,"sku":"35261415","price":13535.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/KW_HLS_001_c5a00456-1920-4cc7-aed6-0e9d4d7708b8.jpg?v=1780135457"},{"product_id":"kw-35261711","title":"KW V3 Clubsport Kit – 1997–2013 Chevrolet Corvette","description":"\u003cp\u003eDesigned to maximize the performance on vehicles with DOT-R and other ultra high-performance tire setups. KW V3 Clubsport coilovers  are the ideal choice for double-duty street cars, use at HPDE's(high performance drivers education), time attack or time trials, and club level racing. The Clubsport setup was specially designed on the Nordschleife and the continuous adjustable ride height allows for fine corner weight or making setup changes. The TVR-A and TVC-A valve technology -provide an unmatched level of separately adjustable damping for the rebound and compression enabling a customized set up appropriate for the vehicle's modifications such as weight, tire characteristics, and other various conditions. The KW V3 Clubsport INOX-LINE coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The KW V3 Clubsport features patented TVR-A and TVC-A technology -hat provides separately adjustable rebound and compression damping. The extensive Adjustment -angle of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and han dling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions clubsport coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended setting before being release for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and  compression adjustability with application specific track focused linear race springs and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStreet-legal race track performance! KW V3 Clubsport provides cutting-edge motorsports technology -or those who enjoy unparalleled handling and performance on the road or track.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529268397,"sku":"35261711","price":6460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Clubsport_2W_001_f483622c-cf44-45ba-a0d4-f86acca341eb.jpg?v=1780135455"},{"product_id":"kw-35261715","title":"KW V3 Clubsport Kit – 2006–2013 Chevrolet Corvette","description":"\u003cp\u003eDesigned to maximize the performance on vehicles with DOT-R and other ultra high-performance tire setups. KW V3 Clubsport coilovers  are the ideal choice for double-duty street cars, use at HPDE's(high performance drivers education), time attack or time trials, and club level racing. The Clubsport setup was specially designed on the Nordschleife and the continuous adjustable ride height allows for fine corner weight or making setup changes. The TVR-A and TVC-A valve technology -provide an unmatched level of separately adjustable damping for the rebound and compression enabling a customized set up appropriate for the vehicle's modifications such as weight, tire characteristics, and other various conditions. The KW V3 Clubsport INOX-LINE coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The KW V3 Clubsport features patented TVR-A and TVC-A technology -hat provides separately adjustable rebound and compression damping. The extensive Adjustment -angle of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions clubsport coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended setting before being release for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and  compression adjustability with application specific track focused linear race springs and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStreet-legal race track performance! KW V3 Clubsport provides cutting-edge motorsports technology -or those who enjoy unparalleled handling and performance on the road or track.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529301165,"sku":"35261715","price":6460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Clubsport_2W_001_35893dcc-16c0-4701-a1df-5c52ff48f2d0.jpg?v=1780135456"},{"product_id":"kw-35261830","title":"KW V3 Clubsport Kit – 2020–2026 Chevrolet Corvette","description":"\u003cp\u003eDesigned to maximize the performance on vehicles with DOT-R and other ultra high-performance tire setups. KW V3 Clubsport coilovers  are the ideal choice for double-duty street cars, use at HPDE's(high performance drivers education), time attack or time trials, and club level racing. The Clubsport setup was specially designed on the Nordschleife and the continuous adjustable ride height allows for fine corner weight or making setup changes. The TVR-A and TVC-A valve technology -provide an unmatched level of separately adjustable damping for the rebound and compression enabling a customized set up appropriate for the vehicle's modifications such as weight, tire characteristics, and other various conditions. The KW V3 Clubsport INOX-LINE coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The KW V3 Clubsport features patented TVR-A and TVC-A technology -hat provides separately adjustable rebound and compression damping. The extensive Adjustment -angle of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions clubsport coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended setting before being release for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and  compression adjustability with application specific track focused linear race springs and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStreet-legal race track performance! KW V3 Clubsport provides cutting-edge motorsports technology -or those who enjoy unparalleled handling and performance on the road or track.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997529366701,"sku":"35261830","price":6940.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Clubsport_2W_001_f79d1e37-094e-46c4-91c7-fb1edc984c86.jpg?v=1780135456"},{"product_id":"kw-68510183","title":"KW ESC Module Convertible\/Coupe\/Hatchback 427 427 Limited Edition Z06 50th Anniversary Edition","description":"\u003cp\u003eCancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and  the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents error messages caused by removing factory electronic dampers.\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of in-cabin drive modes when factory electronics dampers are removed.\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEliminates the error codes or suspension service lights often associated with removing your factory electronic dampers\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997604831405,"sku":"68510183","price":670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/68510183_001_a9d892e7-b556-4c6f-b07e-687398343a8e.jpg?v=1780152209"},{"product_id":"kw-68510357","title":"KW ESC Module Convertible\/Coupe Grand Sport Stingray Z06","description":"\u003cp\u003eCancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and  the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents error messages caused by removing factory electronic dampers.\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of in-cabin drive modes when factory electronics dampers are removed.\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEliminates the error codes or suspension service lights often associated with removing your factory electronic dampers\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997605322925,"sku":"68510357","price":670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/68510357_001_b5dfa8c7-6176-4df9-a8d5-ea01c6c67ab4.jpg?v=1780152212"},{"product_id":"kw-68511166","title":"KW ESC Module Convertible\/Coupe Stingray","description":"\u003cp\u003eCancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and  the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents error messages caused by removing factory electronic dampers.\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of in-cabin drive modes when factory electronics dampers are removed.\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEliminates the error codes or suspension service lights often associated with removing your factory electronic dampers\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997607813293,"sku":"68511166","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/ESC_001_f1635136-a84f-4d3a-b432-f85dccbf753a.jpg?v=1780152490"},{"product_id":"bc-racing-br-coilovers-for-14-19-chevrolet-corvette-c7-rwd-q-12","title":"BC Racing BR Coilovers for 14-19 CHEVROLET Corvette C7 RWD","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for CHEVROLET Corvette C7 RWD (14-19).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037520154797,"sku":"Q-12","price":3145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-br-coilovers-for-97-13-chevrolet-corvette-c5-c6-rwd-extreme-by-default-q-15","title":"BC Racing BR Coilovers for 97-13 CHEVROLET Corvette C5\/C6 RWD EXTREME BY DEFAULT","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for CHEVROLET Corvette C5\/C6 RWD EXTREME BY DEFAULT (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037520253101,"sku":"Q-15","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-br-coilovers-for-97-13-chevrolet-corvette-c5-c6-double-spherical-front-rwd-extreme-by-default-q-25","title":"BC Racing BR Coilovers for 97-13 CHEVROLET Corvette C5\/C6 Double Spherical Front RWD EXTREME BY DEFAULT","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for CHEVROLET Corvette C5\/C6 Double Spherical Front RWD EXTREME BY DEFAULT (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037522120877,"sku":"Q-25","price":1610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-ds-coilovers-for-14-19-chevrolet-corvette-c7-rwd-q-12","title":"BC Racing DS Coilovers for 14-19 CHEVROLET Corvette C7 RWD","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for CHEVROLET Corvette C7 RWD (14-19).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037554626733,"sku":"Q-12","price":3145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"},{"product_id":"bc-racing-ds-coilovers-for-97-13-chevrolet-corvette-c5-c6-rwd-extreme-by-default-q-15","title":"BC Racing DS Coilovers for 97-13 CHEVROLET Corvette C5\/C6 RWD EXTREME BY DEFAULT","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for CHEVROLET Corvette C5\/C6 RWD EXTREME BY DEFAULT (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037554692269,"sku":"Q-15","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"},{"product_id":"bc-racing-ds-coilovers-for-97-13-chevrolet-corvette-c5-c6-double-spherical-front-rwd-extreme-by-default-q-25","title":"BC Racing DS Coilovers for 97-13 CHEVROLET Corvette C5\/C6 Double Spherical Front RWD EXTREME BY DEFAULT","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for CHEVROLET Corvette C5\/C6 Double Spherical Front RWD EXTREME BY DEFAULT (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037554987181,"sku":"Q-25","price":1610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"},{"product_id":"bc-racing-er-coilovers-for-14-19-chevrolet-corvette-rwd-q-12","title":"BC Racing ER Coilovers for 14-19 CHEVROLET Corvette RWD","description":"\u003cp\u003eBC Racing ER Series Series Coilover Kit for CHEVROLET Corvette RWD (14-19).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037564031149,"sku":"Q-12","price":2235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/IMG_1337.jpg?v=1779817030"},{"product_id":"bc-racing-er-coilovers-for-97-13-chevrolet-corvette-rwd-double-spherical-front-q-25","title":"BC Racing ER Coilovers for 97-13 CHEVROLET Corvette RWD Double-Spherical Front","description":"\u003cp\u003eBC Racing ER Series Series Coilover Kit for CHEVROLET Corvette RWD Double-Spherical Front (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037564063917,"sku":"Q-25","price":1610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/IMG_1337.jpg?v=1779817030"},{"product_id":"bc-racing-zr-zx-coilovers-for-14-19-chevrolet-corvette-rwd-q-12-zx","title":"BC Racing ZR-ZX Coilovers for 14-19 CHEVROLET Corvette RWD","description":"\u003cp\u003eBC Racing ZR-ZX Series Series Coilover Kit for CHEVROLET Corvette RWD (14-19).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037569470637,"sku":"Q-12-ZX","price":4320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/IMG_1335.jpg?v=1779817031"},{"product_id":"bc-racing-zr-zx-coilovers-for-97-13-chevrolet-corvette-rwd-double-spherical-front-q-25-zx","title":"BC Racing ZR-ZX Coilovers for 97-13 CHEVROLET Corvette RWD Double-Spherical Front","description":"\u003cp\u003eBC Racing ZR-ZX Series Series Coilover Kit for CHEVROLET Corvette RWD Double-Spherical Front (97-13).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037569503405,"sku":"Q-25-ZX","price":1610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/IMG_1335.jpg?v=1779817031"}],"url":"https:\/\/riderite.us\/collections\/chevrolet-corvette.oembed","provider":"Ride Rite Auto","version":"1.0","type":"link"}