{"title":"Audi RS5","description":null,"products":[{"product_id":"kw-10210075","title":"KW V1 Coilover Kit – 2008–2017 Audi","description":"\u003cp\u003eThe KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEvery single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eWith the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997392134317,"sku":"10210075","price":2560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/10210075_001_de165787-b5a2-48c3-b803-6a21e321fba7.jpg?v=1780193786"},{"product_id":"kw-15210075","title":"KW V2 Coilover Kit – 2008–2017 Audi","description":"\u003cp\u003eKW V2 INOX-LINE coilovers are the perfect solution for drivers who want more than just outstanding looks and adjustable ride height. In addition to stainless steel coilover struts, and corrosion-resistant components built for long term durability, KW V2 coilovers utilize TVR-A (Twin Valve Rebound - Adjustable) technology that allow Adjustment of the rebound damping characteristics with 16 clicks so you can fine tune the ride comfort or performance to your satisfaction. As with all KW coilovers our engineers develop vehicle specific damper settings that undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center. With a KW coilover kit the driving experience is more dynamic and direct. With the rebound adjustability you have a more direct influence on the handling or comfort of the car. With 16 precise clicks you can adjust the KW dampers (more firm or more comfortable) without affecting the compression damping fine-tuned by our engineers. The two-stage, patented TVR-A (Twin Valve Rebound - Adjustable) technology enables a small volume of oil flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while at high damper speeds, the main rebound stage valve opens allowing a larger volume of oil to flow. This provides a big improvement in terms of ride comfort without influencing the high-speed range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control. With KW V2 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V2 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEvery KW damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping allows you to influence the ride characteristics. Paired with vehicle specific spring rates precisely tuned by our engineers, V2 coilovers allow you to choose between more comfort or increased sportiness.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor sporty drivers who want more than just outstanding looks and lowering within the tested Adjustment -angle, the KW V2 \"INOX-LINE\" coilovers are the perfect suspension featuring TVR-A adjustable rebound damping technology.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997435912365,"sku":"15210075","price":3205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/15210075_001_6887d377-70b6-45bd-a60f-d19229385b43.jpg?v=1780105816"},{"product_id":"kw-192104bs","title":"KW HLS 4 For KW Coilovers – 2018–2024 Audi RS5 \/ S5","description":"\u003cp\u003eWith the KW HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speed bumps, railroad crossings, road construction, garage approaches and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or at both axles by up to 45 mm. This prevents accidental damage to your aero components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or as a retrofit for your factory dampers depending on the type of car and the model. For a wide range of super cars and performance vehicles KW HLS is available as an application-specific solution. Included in the delivery is all the necessary parts for installation including the hydraulic lines \u0026amp; hydraulic pump adapted to your vehicle. All of the components will fit perfectly in your car. If you want to combine the HLS with your factory suspension or upgrade to our KW coilovers, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many well-known international automotive companies place th eir trust in KW HLS systems and coilover kits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW HLS adds hydraulic lift to your KW Coilover kit. Designed for vehicles with a low ground clearance to help more easily navigate obstacles like speed bumps and steep driveway entrances.\u003c\/li\u003e\n\u003cli\u003eIncludes a complete system comprised of 4 HLS rams, self-contained vehicle specific pump units, electronic control module and in-cabin multi-function control button.\u003c\/li\u003e\n\u003cli\u003eKW HLS systems does not alter or negatively affect the driving dynamics of your coilover system thanks to the static hydraulic rams which remains completely rigid in the elevated or lowered position.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW HLS systems lift your vehicle at the push of a button, allowing you to negotiate obstacles like speed bumps and steep parking garage entrances. Depending on the kit, your vehicle can be lifted at the front or both axles by up to 45 mm.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997452689581,"sku":"192104BS","price":8050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/KW_HLS_001_1e69f12b-24cd-4f54-bec2-be96d790b5f6.jpg?v=1780113314"},{"product_id":"kw-2531000h","title":"KW Height Adjustable Spring Kit – 2013–2015 Audi RS5 Convertible\/Coupe","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997456687277,"sku":"2531000H","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/HAS_001_9151f40e-6d95-4438-97e4-7d05e323e296.jpg?v=1780113389"},{"product_id":"kw-25310075","title":"KW Height Adjustable Spring Kit – 2008–2018 Audi","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW  ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997456916653,"sku":"25310075","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/25310075_001_b33c37ef-f098-42f5-a38e-d552679d129e.jpg?v=1780113599"},{"product_id":"kw-25310078","title":"KW Height Adjustable Spring Kit – 2009–2017 Audi","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997456949421,"sku":"25310078","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/HAS_001_026e8e92-bb29-45c2-8a5f-33fb933649fa.jpg?v=1780113544"},{"product_id":"kw-253100bs","title":"KW Height Adjustable Spring Kit – 2018–2024 Audi RS5 [253100BS]","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with  the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997457604781,"sku":"253100BS","price":1485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/HAS_001_5efee235-8b41-47dc-8f17-0e5129210bf9.jpg?v=1780113548"},{"product_id":"kw-253100bx","title":"KW Height Adjustable Spring Kit – 2018–2024 Audi RS5 [253100BX]","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997457637549,"sku":"253100BX","price":1485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/253100BX_001_8abaaf03-2a44-4968-a2b8-0ec86827bb70.jpg?v=1780113659"},{"product_id":"kw-253100cs","title":"KW Height Adjustable Spring Kit – 2019–2025 Audi RS5 Sportback [253100CS]","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997457801389,"sku":"253100CS","price":1485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/HAS_001_090675ee-3213-4160-a1f6-50dedecaef4a.jpg?v=1780113549"},{"product_id":"kw-253100ct","title":"KW Height Adjustable Spring Kit – 2019–2025 Audi RS5 Sportback [253100CT]","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997457834157,"sku":"253100CT","price":1485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/253100CT_001_72a9f28a-75ef-4f9d-b36c-a6c6f832d538.jpg?v=1780113660"},{"product_id":"kw-25310106","title":"KW Height Adjustable Spring Kit – 2013–2015 Audi RS5 Coupe","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty a nd harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997458030765,"sku":"25310106","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/25310106_001_16a2865e-9bd7-4101-9e70-c94533f2089e.jpg?v=1780113660"},{"product_id":"kw-35210075","title":"KW V3 Coilover Kit – 2008–2017 Audi","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its  high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997478084781,"sku":"35210075","price":4025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/35210075_001_87f3188c-1f8c-413e-9bd0-8073755ca379.jpg?v=1780095719"},{"product_id":"kw-352100bs","title":"KW V3 Coilover Kit – 2018–2025 Audi RS5 \/ RS5 Sportback \/ S5","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997480804525,"sku":"352100BS","price":4180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/KW_352100BS_001_2000_b134753b-b3d1-4869-b1f6-5dd843b4ed99.jpg?v=1780114690"},{"product_id":"kw-352100cj","title":"KW V3 Coilover Kit Bundle – 2018–2025 Audi RS5 \/ RS5 Sportback","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997482115245,"sku":"352100CJ","price":4560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/352100CJ_001_fdaebf38-d6a1-4e6f-a3f8-f39c7a430ba2.jpg?v=1780094753"},{"product_id":"kw-39010028","title":"KW DDC ECU Coilover Kit – 2008–2017 Audi A4 \/ A5 Quattro \/ RS5 \/ S5","description":"\u003cp\u003eExperience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper system and electronically control the level of performance or comfort that meets your requirements. Included in the package is a KW INOX-LINE coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance electronic damper control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drive rs seat, and an elaborate assembly instructions for an easy installation. The KW DDC ECU suspension features three vehicle-specific damper setups. At the touch of a button you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension will also adjusts automatically to sudden maneuvers. If you add the additional DDC WLAN module to the KW DDC ECU kit the adaptive dampers of the KW DDC ECU suspension can be adjusted independently per axle to your personal driving style and conditions. The App is compatible with smartphones and tablets from Apple (iOS) and many Android devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions DDC ECU coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEvery single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eKW DDC ECU electronically controlled coilover suspension features three vehicle-specific damper setups. At the touch of a button you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort.\u003c\/li\u003e\n\u003cli\u003eOptional W-LAN module allows custom adjustments as well as storing and sharing of custom presets.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe KW DDC ECU coilovers are a part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997586251949,"sku":"39010028","price":6085.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/39010028_001_6ae9526d-aba6-48ba-859e-f2ec8081c383.jpg?v=1780139825"},{"product_id":"kw-3a7100bs","title":"KW V4 Coilover Kit – 2018–2025 Audi RS5 \/ RS5 Sportback","description":"\u003cp\u003eKW V4 coilovers are a combination of our innovative, race proven technology, as well as decades of experience tuning high end sports cars, super sedans and exotics such as the Audi R8, Audi RS6, BMW M5, Lamborghini Aventador LP 750-4 SV, Dodge Charger SRT Hellcat, Mercedes AMG GT and more. In addition to the individually adjustable ride height the KW V4 coilover kit allows an independent Adjustment -f the rebound damping as well as the low-speed and high-speed compression damping. Each KW V4 coilover kit is delivered with a vehicle-specific comfort setting and with the integrated Adjustment -controls the damping characteristics can be set quickly and intuitively transformed to an optimized performance setup. The 3-way adjustable high-performance dampers in the KW V4 coilover kits feature independent Adjustment -f the rebound damping utilizing patented TVR-A technology, as well as the low speed and high speed compression damping utilizing TVCLH-A technology. The KW V4 coilovers are based upon successful race technology utilized by multiple overall winners of the ADAC Zurich 24h Nurburgring race. The new KW V4 coilovers are exclusively developed for select high-performance vehicles, which benefit greatly from the KW suspension technology -o improve their driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V4 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and low and high-speed compression adjustability with application specific street focused spring rates and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVCLH-A (Twin Valve Compression Low High - Adjustable) technology - Patented compression valve allows you to easily fine tune the low speed and high-speed damping and includes suggested settings for both street and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW V4 coilovers are based upon successful race technology utilized by multiple overall winners of the ADAC Zurich 24h Nurburgring race. Exclusively developed for high-performance vehicles to greatly improve their driving dynamics.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997601882285,"sku":"3A7100BS","price":9510.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/3A7100BS_001_96f8a440-9a4d-47f0-afae-ad86c4ecef90.jpg?v=1780151647"},{"product_id":"kw-3a7100cj","title":"KW V4 Coilover Kit Bundle – 2018–2025 Audi RS5 \/ RS5 Sportback","description":"\u003cp\u003eKW V4 coilovers are a combination of our innovative, race proven technology, as well as decades of experience tuning high end sports cars, super sedans and exotics such as the Audi R8, Audi RS6, BMW M5, Lamborghini Aventador LP 750-4 SV, Dodge Charger SRT Hellcat, Mercedes AMG GT and more. In addition to the individually adjustable ride height the KW V4 coilover kit allows an independent Adjustment -f the rebound damping as well as the low-speed and high-speed compression damping. Each KW V4 coilover kit is delivered with a vehicle-specific comfort setting and with the integrated Adjustment -controls the damping characteristics can be set quickly and intuitively transformed to an optimized performance setup. The 3-way adjustable high-performance dampers in the KW V4 coilover kits feature independent Adjustment -f the rebound damping utilizing patented TVR-A technology, as well as the low speed and high speed compression damping utilizing TVCLH-A technology. The KW V4 coilovers are based upon successful race technology utilized by multiple overall winners of the ADAC Zurich 24h Nurburgring race. The new KW V4 coilovers are exclusively developed for select high-performance vehicles, which benefit greatly from the KW suspension technology -o improve their driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V4 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and low and high-speed compression adjustability with application specific street focused spring rates and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVCLH-A (Twin Valve Compression Low High - Adjustable) technology - Patented compression valve allows you to easily fine tune the low speed and high-speed damping and includes suggested settings for both street and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW V4 coilovers are based upon successful race technology utilized by multiple overall winners of the ADAC Zurich 24h Nurburgring race. Exclusively developed for high-performance vehicles to greatly improve their driving dynamics.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997601915053,"sku":"3A7100CJ","price":9875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/3A7100CJ_001_852170a0-222a-48a7-ae72-c11a56bd8c7a.jpg?v=1780151647"},{"product_id":"kw-68510358","title":"KW ESC Module Convertible\/Coupe Base Cabriolet","description":"\u003cp\u003eCancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and  the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents error messages caused by removing factory electronic dampers.\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of in-cabin drive modes when factory electronics dampers are removed.\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEliminates the error codes or suspension service lights often associated with removing your factory electronic dampers\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997605355693,"sku":"68510358","price":765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/68510358_001_8e5421df-35f7-4f47-ad4e-94dcfffe31bd.jpg?v=1780152271"},{"product_id":"kw-68510476","title":"KW ESC Module Convertible\/Coupe\/Hatchback\/Sedan\/Sport Utility\/Wagon Base GT Performance","description":"\u003cp\u003eCancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and  the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents error messages caused by removing factory electronic dampers.\u003c\/li\u003e\n\u003cli\u003eMaintains functionality of in-cabin drive modes when factory electronics dampers are removed.\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEliminates the error codes or suspension service lights often associated with removing your factory electronic dampers\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997606797485,"sku":"68510476","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/68510476_001_65efd0fc-9ff1-495b-948f-38dfa3ad515f.jpg?v=1780152413"}],"url":"https:\/\/riderite.us\/collections\/audi-rs5.oembed","provider":"Ride Rite Auto","version":"1.0","type":"link"}