{"title":"Audi RS4","description":null,"products":[{"product_id":"kw-10210051","title":"KW V1 Coilover Kit – 2007–2008 Audi RS4","description":"\u003cp\u003eThe KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEvery single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eWith the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997391872173,"sku":"10210051","price":2440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/10210051_001_b2285e29-94d4-4c49-9aec-7ad538b2b76e.jpg?v=1780193777"},{"product_id":"kw-10210061","title":"KW V1 Coilover Kit – 2008 Audi RS4","description":"\u003cp\u003eThe KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass  produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEvery single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eWith the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997392068781,"sku":"10210061","price":2440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V1_001_048baf62-587b-449d-8dca-04c2d5285c27.jpg?v=1780101350"},{"product_id":"kw-25310051","title":"KW Height Adjustable Spring Kit – 2007–2008 Audi RS4","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997456752813,"sku":"25310051","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/25310051_001_7db5db54-d2ab-4e3f-815c-209d43618b3a.jpg?v=1780113389"},{"product_id":"kw-25310061","title":"KW Height Adjustable Spring Kit – 2008 Audi RS4","description":"\u003cp\u003eKW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear \u0026amp; tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.\u003c\/li\u003e\n\u003cli\u003eSeamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.\u003c\/li\u003e\n\u003cli\u003eHigh-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.\u003c\/li\u003e\n\u003cli\u003eMaintains complete functionality of factory electronic suspension systems\u003c\/li\u003e\n\u003cli\u003eAvailable for vehicles with or without electronic suspension.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty - Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKW height adjustable springs kits are a great alternative to traditional lowering springs. They allow you to adjust the ride height even after they have been installed. Designed to work with your OE electronic adaptive or regular shocks.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997456883885,"sku":"25310061","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/HAS_001_303ea7fd-e9c7-408f-b1cd-f63c0eed4b1d.jpg?v=1780113544"},{"product_id":"kw-35210051","title":"KW V3 Coilover Kit – 2007–2008 Audi RS4","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, dr ivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997477724333,"sku":"35210051","price":4025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_30daf038-05c0-4bee-86c2-62a6b9c3e51c.jpg?v=1780114414"},{"product_id":"kw-35210061","title":"KW V3 Coilover Kit – 2008 Audi RS4","description":"\u003cp\u003eCutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separatel y and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003cli\u003eElastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUnparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997477986477,"sku":"35210061","price":4025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/V3_001_6c7fafb3-2e61-4d60-a95b-878dcdc02b3d.jpg?v=1780114415"},{"product_id":"kw-35210751","title":"KW V3 Clubsport Kit – 2007–2008 Audi RS4","description":"\u003cp\u003eDesigned to maximize the performance on vehicles with DOT-R and other ultra high-performance tire setups. KW V3 Clubsport coilovers  are the ideal choice for double-duty street cars, use at HPDE's(high performance drivers education), time attack or time trials, and club level racing. The Clubsport setup was specially designed on the Nordschleife and the continuous adjustable ride height allows for fine corner weight or making setup changes. The TVR-A and TVC-A valve technology -provide an unmatched level of separately adjustable damping for the rebound and compression enabling a customized set up appropriate for the vehicle's modifications such as weight, tire characteristics, and other various conditions. The KW V3 Clubsport INOX-LINE coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The KW V3 Clubsport features patented TVR-A and TVC-A technology -hat provides separately adjustable rebound and compression damping. The extensive Adjustment -angle of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions clubsport coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended setting before being release for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and  compression adjustability with application specific track focused linear race springs and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStreet-legal race track performance! KW V3 Clubsport provides cutting-edge motorsports technology -or those who enjoy unparalleled handling and performance on the road or track.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997487161517,"sku":"35210751","price":4635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Clubsport_2W_001_924c11c8-4135-4e4e-8872-afb332a9a6d2.jpg?v=1780114689"},{"product_id":"kw-35210761","title":"KW V3 Clubsport Kit – 2008 Audi RS4","description":"\u003cp\u003eDesigned to maximize the performance on vehicles with DOT-R and other ultra high-performance tire setups. KW V3 Clubsport coilovers  are the ideal choice for double-duty street cars, use at HPDE's(high performance drivers education), time attack or time trials, and club level racing. The Clubsport setup was specially designed on the Nordschleife and the continuous adjustable ride height allows for fine corner weight or making setup changes. The TVR-A and TVC-A valve technology -provide an unmatched level of separately adjustable damping for the rebound and compression enabling a customized set up appropriate for the vehicle's modifications such as weight, tire characteristics, and other various conditions. The KW V3 Clubsport INOX-LINE coilover kit is the ideal tool for p erformance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The KW V3 Clubsport features patented TVR-A and TVC-A technology -hat provides separately adjustable rebound and compression damping. The extensive Adjustment -angle of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKW suspensions clubsport coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany\u003c\/li\u003e\n\u003cli\u003eEach damper is dyno tested to ensure accuracy and preset to our recommended setting before being release for delivery.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.\u003c\/li\u003e\n\u003cli\u003eRoad legal motorsports technology featuring independent rebound and  compression adjustability with application specific track focused linear race springs and matched damper tuning.\u003c\/li\u003e\n\u003cli\u003eTVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.\u003c\/li\u003e\n\u003cli\u003eTVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.\u003c\/li\u003e\n\u003cli\u003eComposite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.\u003c\/li\u003e\n\u003cli\u003eInox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStreet-legal race track performance! KW V3 Clubsport provides cutting-edge motorsports technology -or those who enjoy unparalleled handling and performance on the road or track.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":45997487227053,"sku":"35210761","price":4635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/Clubsport_2W_001_9b2c471f-a8cf-4899-be67-b7cc8c6b23c6.jpg?v=1780114689"},{"product_id":"bc-racing-br-coilovers-for-02-08-audi-a4-fwd-awd-s-02","title":"BC Racing BR Coilovers for 02-08 AUDI A4 FWD\/AWD","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for AUDI A4 FWD\/AWD (02-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037525659821,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-br-coilovers-for-03-08-audi-s4-awd-s-02","title":"BC Racing BR Coilovers for 03-08 AUDI S4 AWD","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for AUDI S4 AWD (03-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037525692589,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-br-coilovers-for-07-08-audi-rs4-sedan-awd-s-02","title":"BC Racing BR Coilovers for 07-08 AUDI RS4 Sedan AWD","description":"\u003cp\u003eBC Racing BR  Series Series Coilover Kit for AUDI RS4 Sedan AWD (07-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037525725357,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-br-series-coilovers-1989-1994-nissan-240sx-s13-d-12-br-42891031642354_12202e9d-0692-40a1-8dc1-d440b4ee9c91.webp?v=1777429949"},{"product_id":"bc-racing-ds-coilovers-for-02-08-audi-a4-fwd-awd-s-02","title":"BC Racing DS Coilovers for 02-08 AUDI A4 FWD\/AWD","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for AUDI A4 FWD\/AWD (02-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037556330669,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"},{"product_id":"bc-racing-ds-coilovers-for-03-08-audi-s4-awd-s-02","title":"BC Racing DS Coilovers for 03-08 AUDI S4 AWD","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for AUDI S4 AWD (03-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037556363437,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"},{"product_id":"bc-racing-ds-coilovers-for-07-08-audi-ds4-sedan-awd-s-02","title":"BC Racing DS Coilovers for 07-08 AUDI DS4 Sedan AWD","description":"\u003cp\u003eBC Racing DS Series Series Coilover Kit for AUDI DS4 Sedan AWD (07-08).\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":46037556396205,"sku":"S-02","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/2405\/1117\/files\/bc-racing-ds-series-coilovers-1989-1994-nissan-240sx-s13-d-12-ds-41091740631282_5f53162c-9a3a-4a4d-b03f-28441a022332.jpg?v=1777431359"}],"url":"https:\/\/riderite.us\/collections\/audi-rs4.oembed","provider":"Ride Rite Auto","version":"1.0","type":"link"}